渣浆泵/河北渣浆泵/渣浆泵厂家/潜水渣浆泵/河北沐阳泵业有限公司
全国客服热线
18631165157
渣浆泵底座需要什么材质及安装方式

渣浆泵底座需要什么材质及安装方式

作者:admin    来源:未知    发布时间:2019-11-30 14:17    浏览量:
渣浆泵底座需要什么材质及安装方式
底座安装时,需在底座与基础之间加放斜铁或垫铁来调整标高和找水平位置。斜铁或垫铁加放在地脚螺栓处,如果底座较大时,需在底座的两头和中间间隔较大处加放斜铁或垫铁。当用垫铁找平时,需准备不同厚度的垫铁,但垫铁最好不超过了块。除找水平外,还要找底座的中心线,以便管路安装时与至进出口法兰重合。找正拧紧地脚螺栓后,还需要向底座空腔内灌浆。渣浆泵厂家

What material and installation method is needed for the base of slurry pump
During the installation of the substructure, it is necessary to add inclined iron or sizing block between the substructure and the foundation to adjust the elevation and find the horizontal position. The inclined iron or sizing block shall be placed at the anchor bolt. If the base is large, the inclined iron or sizing block shall be placed at the two ends of the base and the middle part with large spacing. When leveling with sizing block, it is necessary to prepare sizing blocks of different thickness, but the sizing block should not exceed the block. In addition to leveling, also find the center line of the base, so that the pipeline installation coincides with the inlet and outlet flange. After the foundation bolts are aligned and tightened, grouting is also required to the base cavity. Slurry pump manufacturer

相关新闻推荐

在线客服 :

服务热线:18631165157

电子邮箱: 415130881@qq.com

公司地址:河北省保定市安国市南阳工业区177号

河北沐阳泵业有限公司 ,位于河北省安国市南阳工业区,地理位置优越、交通便利。公司注册资金300万元,专业生产 渣浆泵 等各类泵产品及配件,是目前国内渣浆泵行业技术实力优厚的生产厂家之一,拥有自己的生产经营实体企...

友情链接: 河北鼎峰桩工   
Copyright © 2002-2017 河北沐阳泵业有限公司 版权所有 Power by DeDe58